Warning:
Ensure transmission output shaft has enough spline length to compensate for the extra yoke travel. Output shaft modification may be necessary to prevent bottom-out.
Extended Length Slip Yoke
Part No. T2-3-6081HP8XL
Powerglide, 200-4R, 4L60 (700-R4), 4L60-E, TH350, Muncie & Brinn
Extended length slip yokes help compensate for extreme-travel rear suspension applications, or driveshaft lengths that are slightly shorter than necessary. Sonnax extended length performance slip yoke T2-3-6081HP8XL is forged from a chromoly billet to provide superior strength and performance for dirt oval track racing in a variety of applications, including those listed here.
Talk with a transmission builder or driveline shop to verify your vehicle's output shaft style.
- Material: Forged Chromoly
- Counter Bore (Y/N): N
- Spline Type: Full
- U-Joint Series: 1310
- Weight: 2.330lbs
- Centerline to End Length: 8.000"
- Spline Tooth Count: 27
- Journal Dia.: 1.503"
- Barrel Length: 6.100"
Where to Buy
Contact your Sonnax Performance Slip Yokes Distributor or your local driveline shop for availability. If you need assistance finding a shop, fill out the form and a Sonnax driveline product specialist will contact you.
Videos
Learn All About Sonnax Slip Yokes
How to Measure a Slip Yoke
Measure OE slip yoke with a precision tool to determine which Sonnax yoke you need. Centerline to end length, journal size and U-joint series are critical dimensions requiring accurate measurements.
- Some slip yokes have missing splines — include the missing spline in your count or count the splines on the transmission output shaft.
- Also check if the OE yoke has a counterbore and whether the transmission tail housing uses a bushing or roller bearing.
- A Spline Count
- B Journal Dia.
- C Centerline to End Length
- D Barrel Length
- E U-Joint Width*
- F U-Joint Cap Diameter*
*U-joint bores in yoke will be slightly larger than the actual U-joint dimensions given in the chart below.
How to Determine a U-Joint Series
| U-Joint Series |
E U-Joint Width (inches) |
F U-Joint Cap Diameter (inches) |
|---|---|---|
| 3R | 2.562 | 1.125 |
| 1310 | 3.219 | 1.062 |
| 1330 | 3.622 | 1.062 |
| 1350 | 3.622 | 1.188 |
| 1410 | 4.188 | 1.188 |
| 1480 | 4.188 | 1.375 |
| 1485 | 4.178 | 1.375 |
| 1550/1555 | 4.964 | 1.375 outside snap rings |
Measure the inside snap ring, indicated on the diagram as G.
