Flange Yoke
Part No. T3-2-949A

Builders of Mustang driveshafts who want to upgrade from a 1330 U-joint have long had to make due with purchasing an extra adaptor flange to allow installation of a 1350 flange yoke. Now, with Sonnax flange yoke T3-2-949A, the days of sourcing an extra adaptor are over. The Sonnax yoke is forged and precision-machined to accept a 1350 U-joint while maintaining compatibility with the OE 3.5 inch bolt circle and 2" female pilot hole diameter found in Ford Mustang 7.5" and 8.8" differentials.

  • Lowers build cost
  • Reduces rotating mass with elimination of adaptor flange
  • U-Joint Series: 1350
  • Pilot Type: F
  • Material: 6061-T6 Aluminum
  • Bolt Count: 4
  • Bolt Hole Dia.: 0.516"
  • Flange Face to Centerline: 1.550"
  • Weight: 0.870lbs
  • Bolt Circle Dia.: 3.50"
  • Pilot Dia.: 2.000"

Where to Buy

Contact your local driveline shop for availability. If you need assistance finding a shop, or if you would like to become a distributor, fill out the form and a Sonnax driveline product specialist will contact you.

  •  Flange Yoke T3-2-949A

Aluminum Flange Yokes

  • Precision machined from billet aluminum
  • Unrivaled concentricity for exceptional balance & minimal runout
  • Significantly reduced weight vs. steel (up to 54%)
  • Superior craftsmanship & finish complement a show-quality driveline

What vehicles do these flanges fit?

Measure bolt circle diameter as well as pinion and output flange bolt hole diameters to determine if these yokes will fit your build.

  1. U-Joint Series
  2. Bolt Hole Dia.
  3. Bolt Circle Dia.
  4. Pilot Style
  5. Flange Face to Centerline